75
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
The
Physical Address
menu displays the current address and the status of the pro-
gramming LED (the address is 15.15.250 on delivery).
5.2.13. Service / Access codes
Access codes, that protect certain menu areas from unauthorised changes, can be set
in the ETS or at the screen in the menu
Settings > Service
. the Service menu can also
be used for re-starting the unit and for re-setting to facory defaults.
Access Codes
The code 1 for
General Settings
protects the menus
The code 2 for
Automatic Settings
protects the menus
If an access code has been activated at the touch display but is no longer available for
input, the unit can be unlocked via the ETS.
5.2.13.1. Setting access codes using the ETS
Activate the
“
Transfer parameters” function for access codes under
“
General settings”
in the ETS. Then set the codes in the appearing menu.
Access code (for General Settings and for Automatic Settings)
5.2.13.2. Setting access codes at the screen
Press the buttons:
Activate access code
No
• Yes
Access code
(only when the access code is activated)
Input field for access code
If no value is entered, the access code is not activated.
Press the Programming button, in order to address the device to the bus.
Language
Location
Display
TH Sensor
Alarm
Phys. Addresse
Service
(automatic menu for light)
(automatic menu for drives)
Service
Access Code 1/2
