82
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Deactivate: To switch off the Reset function for these lights, select
No
(this is the de-
fault setting).
Confirm your setting using the
OK
button.
You can set automatic reset times and/or durations.
Settings > Automatic > Automatic Reset
Change automatic settings at the screen, page 67
5.4.
Drives and ventilation units
To be able to set and operate the drives of blinds, awnings, shutters and windows and
ventilation equipment on the
Room Controller KNX Touch One
, the individual
drives must first be created and set up in the ETS.
Please adjust the settings for the drives to the individual conditions. This is the only
way that alarm and locking functions such as rain or wind warnings will help to protect
external awnings or prevent rain coming in through a window. Also note the general
automatic settings and set the time/date and location.
Automatic settings, page 66
Date and time, page 57
Location, page 60
5.4.1.
Setting drives using the ETS
5.4.1.1. Safety notes for automatic functions
WARNING!
Risk of injury due to automatically moved components!
The automatic control may cause parts of the system to travel
and pose a danger to humans.
•
No persons may remain in the travelling range of parts driven
by an electric motor.
•
Adhere to the relevant building regulations (see guideline for
power-operated windows, doors and gates BGR 232 et al).
•
Always disconnect the system from the mains power before
maintenance or cleaning (e.g. switch off/remove fuse).
Precipitation warning for automatically controlled windows:
Some time can pass before falling rain is recognised by the sensors in the system, de-
pending on the rain amount and outdoor temperature. Furthermore, a closure time
must be calculated for electrically-actuated windows or sliding roofs. Humidity-sensi-
tive items should therefore not be placed in an area where they might be damaged by
incoming precipitation. Please also bear in mind that in the event of a power failure and
rainfall, a window will not be automatically closed if no emergency generator is in-
stalled.
