60
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Consecutively press, the hour and minute fields in order to set the time zone (relative
to GMT) using the arrow buttons.
Press the button next to
Summertime Rule
to set the automatic switch-over to sum-
mer time. Depending on your location, select
Europe, USA or None
(if no summer-
time switch-over shall take place), or
User-defined
(if you want to be able to set the
time setting individually).
Confirm your setting using the
OK
button.
The Summer Time time settings for Europe and the USA are shown in the lower area
of the touch display.
If a
“
User-defined” Summer Time rule is selected:
When you want to set the time individually (User-defined), a new window will open.
You can use the arrow buttons to set the time zone, start/end of summer time as well
as the Daylight Saving Time:
Press
Time zone
and then, consecutively, the hour and minute fields in order to set
the time zone (relative to GMT) using the arrow buttons.
Press the button beside
Start of summer time
, and a new window will open.
When pre-setting the
“
Fixed date
”, press the day, month, hour and minute fields con-
secutively in order to set the start date of summer time using the arrow buttons. If you
want to set a specific weekday, press the
Fixed date
button in order to change this to
a specific weekday.
Confirm your setting using the
OK
button.
Press the hour and minute fields consecutively in order to set the daylight savings time
using the arrow buttons.
Confirm your setting using the
OK
button.
5.2.5.
Location
The information on the location is necessary in order to calculate the position of the
sun (shading automation). If this location data is not correct, the shading elements will
not be correctly controlled. The location is entered using the ETS or at the screen.
Time zone
Start of summer time
End of summer time
Time shift summer/winter time
