63
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
The menu is code-protected if access code 2 is activated.
Set brightness automation
Press the button beside Auto. brightness and select from
Fixed value
,
Ambient
brightness
or
via Object
by repeated pressing.
If you want to define a set value for the brightness of the display, select
Fixed value
and input the desired % value using the arrow buttons.
If you select
Ambient brightness
or
via Object
, the brightness which is either auto-
matically determined or set by the object is increased by 30% when the touch display
is touched. This value is maintained for one minute after the last touch contact.
The automatic brightness function uses
ambient brightness
to adjust the display
screen to the light conditions in the room (the darker the room, the darker the display
screen lighting).
If the brightness of the display is to be controlled via an object, select
via Object.
In this case, the switch-over automation is deactivated.
Setting the automatic switch-off
The
automatic swtich-off
can be used if if the display screen brightness is controlled
by a fixed value or by the ambient brightness. If the brightness of the display is con-
trolled via an object, the asutomation is deactivated
.
Select the setting by pressing the
button next to “Autom. switch-off“.
If the automatic switch-off is set to
On
, the display lighting will be turned off if no com-
mand is given for 1 minute. If the screen is touched, it re-activates.
If the automatic switch-off is set to
When ambience dim
, then the display lighting will
switch off if the room is dark. If the room is lit, the display lighting will automatically
re-activate. If the screen is touched, it also re-activates. If no command is given for
around 1 minute, the automatic switch-off darkens the screen again.
