93
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
The selected drive is marked in white. The right-hand side contains information on the
status (e. g. position, error messages) and different operating possibilities (up/down
arrow buttons, automatic button, settings button).
For blinds and windows, the To an From buttons are equipped with timer automation.
A brief press (less than 1 second, brief audible signal) allows the drive to be precisely
positioned. If the button is pressed for longer than 1 second (higher audible signal: de-
tection signal), the drive moves automatically to its end position. Briefly pressing the
Up or down buttons stops the drive.
If manual operation of a drive group is currently locked by the
rain, wind or frost
alarm
, the arrow buttons are greyed out and cannot be operated. The message
“
Rain
alarm” and/or
“
Wind alarm” are displayed.
Unlock manual operation
Manual operation is only possible once frost, rain and wind alarms are switched off.
The
frost alarm
can be switched off by pressing the frost alarm button for 7 seconds.
The frost lock will then only be active for this drive again when it is reactivated manu-
ally or the next time the frost alarm is triggered.
A drive or curtain can be damaged if an external shade which
has frozen stiff is retracted!
Activate and adjust automatic functions
You can tell whether a drive or unit is in automatic mode or must be manually operated
by the white marking of the
“
Auto” button to the right, and by the
“
Auto” text beside
the button name in the list in the left-hand area.
After any manual operation, the drive or unit remains in manual mode. The automation
functions are then switched off and only rain, wind and frost protection are available.
An automatic reset will switch the device back to automatic mode. The automatic reset
can be separately activated for each drive group and each unit in the automatic menu.
Use the arrow buttons to set the exact time for the daily automatic reset. Pre-setting:
3.00 am. Use the arrow buttons to set the time when the drives are reset to automatic
after manual operation. Pre-setting: 60 min
Settings > Automatic > Automatic Reset
Change automatic settings at the screen, page 67
Auto
