66
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
The
Start menu
allows you to change the names of all set functions, the
Universal menu
to change the texts of the pages and allocated functions, and the
Scene menu
to rename all set scenes.
Press the appropriate button and input the desired name into the button field which ap-
pears.
Input keyboard for names and codes, page 49
Confirm your text input using the
OK
button.
5.2.8.
Automatic settings
The general automatic menu in the ETS allows you to adjust settings that apply to all
drives/lightapplications:
•
Twilight value for shading and light
•
Movement delays for shading
•
Night-time re-cooling for windows
•
Frost alarm for shading and windows
•
Automatic reset
5.2.8.1. Change general automatic settings using the ETS
Activate the
“
Transfer parameters” function for the automatic functions under
“
Gener-
al settings” in the ETS. Then set the automatic functions in the appearing menus.
Twilight:
Note that on moonlit nights, brightness values short below 10 lux can be achieved. If
the twilight value is set below 10 lux, shades which are set to “close at night” will re-
main open because of the moonlight or retract during the night.
Night is determined at a light level below
(in lx)
1...200; 10
