130
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Dead man's switch:
The drive moves as soon as the button is pushed and stops as soon as the button is
released.
Actuating variable comparator (ETS)
The four actuating variable comparators of the
Room Controller KNX Touch One
compare up to 5 inputs each and output maximum, minimum or the average value.
The actuationg variable comparators are set via the ETS.
5.9.1.
Actuating variable comparator 1...4
Point in time 1:
End of time 1, start of time 2
Moving command
Release after time 1 expired
but before time 2 expires:
Stop
Release after time 1 + 2 expired:
Move into end position
Control mode
Comfort mode
Behavior during button operation:
Button is pushed and
released before time 1 expired = stop/step
held longer than time 1 = Up or Down
released between time 1 and 1-2= stop
released after time 1 +2 = no more stop
Time 1
0.0s ... • 2 s; 0.4 s
Time 2
0 s • 2 s; 2 s
Control mode
Dead man's switch
Behavior during button operation:
Push button = Up or Down command
Release button = Stop command
Use comparator 1-4
Ja • Nein
Output delivers
• Maximum value
• Minimum value
• Average value
Use 1...5 input
Yes • No
(Yes acivates the communication object
“Actuating variable comparator X: input
X“)
Output sends
• on change of output
• on change of output and periodically
• when receiving an input object
• when receiving an input object
and periodically