79
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
You can access the light application operations via the light menu:
You can operate the connected light applications directly here: Use the buttons to se-
lect the names to the left of the lighting which you want to operate.
The selected light is marked in white. The right-hand side contains information on the
status (e. g. dimming brightness, error messages) and different operating possibilities
(up/down arrow buttons, Automatic button, Settings button).
The light operation varies by the application type that has been set using the ETS.
Light as switch (On/Off buttons):
Switch the light using the
On
or
Off
buttons. The automatic functions for the respec-
tive lighting are deactived by the manual operation (if set so, only to a fixed automatic
reset).
Light as dimmer (Up/Down buttons):
Dim the light using the
Up
and
Down
buttons. The automatic functions for the respec-
tive lighting are deactived by the manual operation (if set so, only to a fixed automatic
reset).
Briefly press and release ==> ON/OF
Extended press and hold ==> Dimmer brighter/darker
Release
==> Stop
Light
Use the arrow buttons to scroll through the list.
Off
On
