71
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
External component
The resulting total measurement value for temperature and humidity is then applicable
to the display and all automatic settings.
TH sensor transmission behaviour
You can set the transmission behaviour of temperature and humidity in the ETS menu
“TH sensor transmission behaviour“:
5.2.9.2. Setting the TH sensor at the screen
Press the buttons:
The menu is code-protected when access code 2 is activated.
The external temperature must reach
percent
0...100
The external humidity must reach
percent
0...100
of the TH sensor measurement value.
Internal and total temperature
• do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
From change (in °C)
• 0,1 • 0,2 • 0,5 • 1,0 • 2,0 • 5,0
Cycle
5 s … 2 h
Internal and total humidity
• do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
From change (in %)
• 0,1 • 0,2 • 0,5 • 1,0 • 2,0 • 5,0
Cycle
5 s … 2 h
Use minimum / maximum values
No • Yes
TH Sensor
Adjust
