Elsner KNX Touch One Installation And Operation Manual Download Page 51

Page: 51 / 144

Operation

Room Controller KNX Touch One

• Status: 29.04.2014 • Errors excepted. Subject to technical changes.

4.4.

Protect menus with access codes

If you want to prevent unauthorised changes of the automatic functions or in the set-
tings menu, you can set an access code for certain areas. The protected menu areas
are only accessible after the input of the correct code.

The code for

General Settings

protects the menus

The code for

Automatic Settings

protects the menus

If an access code has been activated at the touch display but is no longer available for
input, the unit can be unlocked via the ETS.



Setting access codes using the ETS, page 75



Setting access codes at the screen, page 75

Language
Location
Display
TH Sensor

Alarm
Phys. Addresse
Service

(automatic menu for light)

(automatic menu for drives)

Summary of Contents for KNX Touch One

















































































































































Search results

Summary of Contents for KNX Touch One

Reviews:

Related manuals for KNX Touch One

Brands by name

Popular brands

Elsner KNX Touch One, Installation And Operation Manual

Search results

Summary of Contents for KNX Touch One

Reviews:

Related manuals for KNX Touch One

Brands by name

Popular brands