106
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Setting a value: Use the arrow buttons to change the value as required.
Pre-setting: 5.0 °C .
The outdoor temperature-block becomes active as soon as the temperature sinks un-
der the pre-set value. The block is however only deactivated again when the tempera-
ture rises over the pre-set value by more than 2.0 °C (hysteresis).
Switching off the lock: If the window should be controlled independently of the exter-
nal temperature, press the
Off
button.
Confirm your setting using the
OK
button.
Press the button to set the shut-off time. Shut-off times prevent the windows for exam-
ple from opening and closing at night, and thus causing noise.
Make sure that no night-time re-cooling is possible during the set shut-off times.
Press
Select
to select the times during which the window should be closed. Activate
one or more times on the list. These operating times can be individually customised.
Confirm your setting using the
OK
button.
To change any of the time periods set in the timer, press
Timer
.
Setting the timer at the screen, page 124
Press the button to activate or deactivate the frost alarm for this window. The frost
alarm sends the security object if the outdoor temperature is low and it is raining/
snowing at the same time. This prevents damage from ice (e.g. at the seal).
The conditions for the triggering of the frost alarm (outdoor temperature, period) are
defined in the
“
Settings” menu.
Settings > Automatic > Frost alarm
Change automatic settings at the screen, page 67
When the frost alarm is triggered, manual operation of the window is initially blocked.
You can remove the block by deactivating the frost alarm. The block will then be first
active for this drive again when it is reactivated manually or the next time the frost
alarm is triggered.
Activate: If the security object is sent when there is a frost alarm, select
Yes
.
Deactivate: If the security object should not be sent when there is a frost alarm, select
No
(default setting).
Confirm your setting using the
OK
button.
Timed Closure
Frost alarm
