57
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
•
TH sensor* (adjustment, external proportion)
•
Remo 8 (programm remote control)
•
Alarm* (reaction)
•
Phys. Address*
•
Service* (access codes, restart, factory settings)
*code-protected when access code 2 is activated
If an access code has been activated but is no longer available for input, the unit can
only be unlocked via the ETS.
Settings > Service > Access Code
Setting access codes using the ETS, page 75
Setting access codes at the screen, page 75
The settongs options for the parameters are described in the chapters
Language
,
Date
and time
....
5.2.3.
Language
The display language can be set to German, English, French or Italian.
5.2.3.1. Setting the language using the ETS
Activate the
“
Transfer parameter” function for the language in the ETS's
“
General
Settings” menu. Then select the language in the appearing “Language“ menu.
5.2.3.2. Setting the language at the screen
Press the buttons:
Choose the button for the language you want from the menu. Confirm your setting us-
ing
OK
.
The menu is code-protected when access code 2 is activated.
5.2.4.
Date and time
5.2.4.1. Setting the date and time in the ETS
Activate the
“
Transfer parameters” function for date and time under
“
General set-
tings” in the ETS menu. Then set the display of seconds, the time zone and the summer
time rule in the appearing “Date and time“ menu.
Language
• German
• English
• French
• Italian
Language
