43
Operation
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
The Start menu is the central display from which you can reach the other menu areas.
The date and time are shown on the Start screen and six free places are available. Sen-
sor values and control buttons can be shown here. The Start screen must be set up in
the ETS. After the initial start only the values of the integrated indoor sensor and, if ap-
plicable, error messages will be shown.
Set the Start Menu (ETS), page 52
The texts displayed (e.g. names for the sensors and functions) can also be changed on
the display.
Settings > Texts
Changing text at the screen, page 65
Alarm and error messages:
When malfunction or error messages are displayed, the data and time are no longer
visible. Comments about alarm and error messages can be found in the chapter
Alarm and error messages, page 37
Date and time:
Once date and time have been received by the
KNX Touch One
, they appear on the
start screen. The time can be displayed with or without seconds.
Settings > Date and Time
Date and time, page 57
Indoor data (TH Sensor):
If the measured values of the integrated sensor are affected by external influences
(sources of interference like direct sunlight), they can be corrected manually.
TH sensor, page 70
You get to the Start Menu from all menus by pressing “Home“
