85
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Sun position angle
5.4.1.3. Setting awnings using the ETS
The drives of awnings are setup in the menu item “Awning 1...4“.
If you transfer these parameters, the settings which have been
made manually on the touch display will be overwritten.
Slat position
• Does not track the sun
• Tracks the sun
Slat position (in %)
(only when the slat position does not
follow the sun)
0...100; 75
Sun height:
(only when the slat position follows the
sun)
Slat position (in %):
0° - 15°
0...100
15° - 30°
0...100; 80
30° - 45°
0...100; 65
45° - 90°
0...100; 50
Use internal temperature lock shut-off
(only if an interior temperature lock is used)
No
• Yes
Allow shading from (in 0.1 °C)
50...400; 250
Use external temperature shut-off
No
• Yes
Allow shading from (in 0.1 °C)
-200...300; 50
All sides
greater than 0°
lower than 360°
West
greater than 180°
lower than 360°
South-West
greater than 135°
lower than 315°
South
greater than 90°
lower than 270°
South-East
greater than 45°
lower than 225°
East
greater than 0°
lower than 180°
Use awning
No • Yes
Transmission behaviour of the safety
object
• on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Transfer the following parameters
No
• Yes