109
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
•
Timed ventilation (and steps for timed ventilation)
•
Switch automatic reset on/off
The automatic ventilation function can be accessed by pressing the buttons:
Press the
Name
button and input the desired name into the button field which appears.
Input keyboard for names and codes, page 49
Confirm your input using the
OK
button.
Press the button to select whether the interior room sensor is assessed. If
“
No sensor
”
is selected, the interior temperature, air humidity and CO2 content are not taken into
consideration when controlling the ventilation (default setting).
Confirm your setting using the
OK
button.
Press the button to set the internal temperature at which the ventilation is opened.
Setting the temperature: Adjust the value for the desired room temperature using the
arrow buttons. Pre-setting: 25.0 °C.
Shutting off ventilation: If ventilation is to be independent of indoor temperature, press
the button labelled
OFF
.
Confirm your setting using the
OK
button.
Press the button to set the air humidity at which the ventilation is opened. If no interior
room sensor is selected, air humidity is not observed.
Setting humidity: Adjust the value for the desired room humidity using the arrow but-
tons. Pre-setting: 80%.
Shutting off ventilation: If the ventilation should be performed independently of air hu-
midity, press the
OFF
button.
Confirm your setting using the
OK
button.
Ventilation Unit
Name
Sensor selection
Indoor temperature
only when an indoor sensor is selected
Air humidity
only when an indoor sensor is selected
