103
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Confirm your setting using the
OK
button.
Press the button to set the internal temperature at which the window is opened.
Setting the temperature: Adjust the value for the desired room temperature using the
arrow buttons. Pre-setting: 25.0 °C.
The window is opened as soon as the temperature lies above the pre-set value. How-
ever, it is only closed again when the temperature sinks by more than 2.0 °C under the
pre-set value (hysteresis).
Shutting off ventilation: If the interior temperature should be independently ventilated,
press the
Off
button.
Confirm your setting using the
OK
button.
Press the button to set the air humidity at which the window is opened. if no interior
room sensor with humidity measurement is selected, air humidity is not taken into
consideration.
Setting humidity: Adjust the value for the desired room humidity using the arrow but-
tons. Pre-setting: 80%.
The window is opened as soon as the air humidity lies above the pre-set value. it is
however closed again once the humidity drops more than 3.0%
below the set value (hysteresis).
Shutting off ventilation: If the ventilation should be performed independently of air hu-
midity, press the
OFF
button.
Confirm your setting using the
OK
button.
Press the button to set the room air CO2 content at which the window is opened or
closed.
Setting CO2 content: The window is opened as soon as the CO2 content lies above the
pre-set value. It is closed again once the CO2 value lies below the set value. Adjust both
CO2 values using the arrow buttons (default window opening setting: > 800 ppm; de-
fault window closure setting: < 550 ppm).
Shutting off ventilation: If the ventilation should be performed independently of CO2
content, press the
OFF
button.
Confirm your setting using the
OK
button.
Indoor temperature
only when an indoor sensor is selected
Air humidity
only when an indoor sensor is selected
CO 2
only when an indoor sensor is selected