72
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Press
Adjust
and use the appropriate arrow buttons to correct the measured tempe-
rature and measured humidity upward or downward. The measurement value may
need to be corrected when the temperature or air humidity at the sensor does not cor-
respond to the room average reading (for example when the
Room Controller KNX
Touch One
is positioned in a location which is warmer than average).
Confirm your setting using the
OK
button.
The intrinsic heat of the unit is already taken into consideration during the temperature
measurement.
Press
External component
and use the respective arrow buttons to set the percent-
age component of the external temperature and humidity in the TH sensor measure-
ment value.
Pre-setting: 0 %
Confirm your setting using the
OK
button.
5.2.10. Remo 8 Remote Control
With the optional radio remote control Remo 8, drives (or dirve grous) and lights (or
light groups) configured at the
Room Controller KNX Touch One
can be operated.
The hand-held transmitter must be taught to the
KNX Touch One
via a screen menu
first. Press the buttons:
Adjust
External component
Remo 8
