77
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
Press
Reset
and the control system will restart.
5.2.13.4. Factory defaults
Resetting to factory settings will delete all basic and automatic settings. The control
system will be returned to its delivery condition. The factory settings can be accessed
by pressing the buttons:
Select
Factory settings
. Enter the code
“
81” into the button field which appears and
confirm this by pressing the
OK
button. The factory settings will be loaded and the con-
trol system restarted.
5.2.13.5. Internal area
The internal area allows basic unit settings to be changed. You are not authorised to
make such changes.
Test mod.
A function which is only intended for internal company test purposes.
5.3.
Light applications
To enable adjustment and operation of light applications at the
Room Controller
KNX Touch One
, the individual lamps must be configured in the ETS first.
5.3.1.
Set light using the ETS
Light applications are setup via the menu items “Light 1...8“. Light can be set for sim-
ple switching or for dimming.
Use light as switch or dimmer:
Use light 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
• No
• Yes as switch
• Yes as dimmer
Use light 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
Yes as switch or Yes as dimmer
Transfer the following parameters
No • Yes
Reset
Service
Factory Settings
Factory Settings
