62
Adjustment
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
5.2.6.
Display
The brightness, switching off and background colours for the display screen can be in-
dividually set. Additionally, the surface operations (using the upper half of screen as a
button) can be activated and the standard page can be set.
5.2.6.1. Setting the display using the ETS
Activate the
“
Transfer parameters” function for display under
“
General settings” in the
ETS. Then set the display in the appearing “Diyplay“ menu.
The value sent by the object surface operation is determined by the parameter “surface
operation object sends“ in the General settimgs in the ETS.
Basic setting in the ETS, page 55
Assignment of the object value when switching according to value of object “display
page selection“:
0 = no switching
1...8 = Universal menu pages 1...8
10 = Weather data display
11 = Start screen
5.2.6.2. Setting the display at the screen
Press the buttons:
Brightness
• Has a specific value
• is adjusted to ambient light
• controlled by means of an object
Brightness in %
(only when brightness is defined using a
set value)
1...100
Automatic shutdown
(does not appear when brightness is
controlled by an object)
• From • To
When the upper half of the display is
touched, the surface operation object
sends
• never • always
Background colour for operator menus
• Blue • Grey • Red • Green • Yellow
If screen is not touched for 5 minutes,
display switches
• not
• to weather data
• to start menu
• to universal menu 1...8
• to value of object “display page selec-
tion“
Display
