Eaton SVS/12, User Manual

Page: 52 / 138

SVS/12
52 994.530 G01 02
7.

Hang a double folded nylon thread over the edge of each
opening in the cable box, with the ends hanging inside,
see figure 3.

Now slide the cable box completely on to the cast resin
insulation.
8. Fit the protection cover on the right side and secure it. Make
sure that the clamping edge of the cable box adequately
rests on the bearing face of the protection cover, see
figure 4.
9. Fit the hose clips on the end of the cable box and tighten it
(torque 5 Nm).
10. Secure the floor plate. Place the grommet in the floor plate.
11. Fill the cable box with grease (see chapter 3.3.8).
3.
4.