Eaton SVS/12, User Manual

Page: 129 / 138

SVS/12
994.530 G01 02 129
15. Single-pole voltage tester type UNL
The single-pole voltage tester (type UNL) consists of two
parts:

the probe (antenna) with exchangeable test point;

the grip.
The probe is screwed onto the grip before use. During
transport of the tester the probe can also be fixed to the
grip in inverted position.
The probe has a clearly visible red ring.
An indicator lamp (c) and push button (d) are fitted to the
wide end of the probe (which is screwed to the grip). The
indicator lamp lights up when a voltage is present at the
test point of the probe. The pushbutton is used to test the
probe.
The rated voltage of the probe should be equal to the
operating voltage of the installation being tested. The rated
voltage is indicated on the wide part of the probe.
C
AUTION
•
Do not insert the voltage tester into live parts of
the installation any further than the red ring.
•
Clean and dry the voltage tester thoroughly
before using it.
•
Hold the voltage tester firmly behind the ring on
the grip
N
OTE
Read the user instructions included with the
voltage tester.
15.
16. Extraction tool for removing end caps of voltage
transformers
16.