Dell Vostro 1400 Owner'S Manual Download Page 204

Page: 204 / 248

204

Specifications

ExpressCard connector

one ExpressCard slot (54 mm)

Cards supported

ExpressCard/34 (34 mm)

ExpressCard/54 (54 mm)

1.5 V and 3.3 V

ExpressCard connector size

26 pins

8-in-1 Memory Card Reader

8-in-1 memory card controller

Ricoh R5C833

8-in-1 memory card connector

8-in-1 combo card connector

Cards supported

• Secure Digital (SD)
• SDIO
• MultiMediaCard (MMC)
• Memory Stick
• Memory Stick PRO
• xD-Picture Card
• Hi Speed-SD
• Hi Density-SD

Memory

Memory module connector

two SODIMM connectors

Memory module capacities

512 MB, 1 GB, 2 GB

Memory type

667 MHz SODIMM DDR2

Minimum memory

512 MB

Maximum memory

4 GB

NOTE:

In order to take advantage of the dual channel bandwidth capability, both

memory slots must be populated and must match in size.

NOTE:

The available memory displayed does not reflect the complete maximum

memory installed because some memory is reserved for system files.

ExpressCard

(continued)

book.book Page 204 Wednesday, September 16, 2009 11:12 AM

Summary of Contents for Vostro 1400

























































































































































































































































Search results

Summary of Contents for Vostro 1400

Reviews:

Related manuals for Vostro 1400

Brands by name

Popular brands

Dell Vostro 1400, Owner'S Manual

Search results

Summary of Contents for Vostro 1400

Reviews:

Related manuals for Vostro 1400

Brands by name

Popular brands