Dell Force10 E300, Configuration Manual

Page: 973 / 1262

sFlow | 973
47
sFlow
sFlow is supported on platforms
c e s
sFlow is supported on E-Series ExaScale
e
x
with FTOS 8.1.1.0. and later
.
• Enable and Disable sFlow on page 975
• sFlow Show Commands on page 976
• Configure Collectors on page 978
• Polling Intervals on page 978
• Sampling Rate on page 979
• Back-off Mechanism on page 980
• sFlow on LAG ports on page 980
• Extended sFlow on page 980
Overview
FTOS supports sFlow version 5. sFlow is a standard-based sampling technology embedded within
switches and routers which is used to monitor network traffic. It is designed to provide traffic monitoring
for high speed networks with many switches and routers. sFlow uses two types of sampling:
• Statistical packet-based sampling of switched or routed packet flows
• Time-based sampling of interface counters
The sFlow monitoring system consists of an sFlow Agent (embedded in the switch/router) and an sFlow
collector. The sFlow Agent resides anywhere within the path of the packet, and combines the flow samples
and interface counters into sFlow datagrams and forwards them to the sFlow Collector at regular intervals.
The datagrams consists of information on, but not limited to, packet header, ingress and egress interfaces,
sampling parameters, and interface counters.
Packet sampling is typically done by the ASIC. sFlow Collector analyses the sFlow datagrams received
from different devices and produces a network-wide view of traffic flows.