Dell Force10 E300, Configuration Manual, Page: 992 / 1262

992 | Simple Network Management Protocol
www.dell.com | support.dell.com
To copy a configuration file:
Table 7 shows examples of using the command
snmpset
to copy a configuration. These examples assume
that:
• the server OS is Unix
• you are using SNMP version 2c
• the community name is public, and
• the file f10-copy-config.mib is in the current directory or in the snmpset tool path.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the
server. Username for for the FTP, TFTP, or
SCP server.
• If the copyUserName is specified so
must copyUserPassword.
copyUserPassword .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Password for the
server. Password for the FTP, TFTP, or SCP
server.
Step Task Command Syntax Command Mode
1 Create an SNMP community string with read/
write privileges.
snmp-server community
community-name
rw
CONFIGURATION
2 Copy the f10-copy-config.mib MIB from the Dell Force10 iSupport webpage to the server to which you are
copying the configuration file.
3 On the server, use the command
snmpset
as shown:
snmpset -v
snmp-version
-c
community-name
-m
mib_path
/f10-copy-config.mib
force10system-ip-address
mib-object
.
index
{
i
|
a
|
s
}
object-value...
• Every specified object must have an object value, which must be preceded by the keyword
i
. See Table 6 for
valid values.
•
index
must be unique to all previously executed
snmpset
commands. If an index value has been used
previously, a message like the one in Message 3 appears. In this case, increment the index value and enter the
command again.
• Use as many MIB Objects in the command as required by the MIB Object descriptions in Table 6 to complete
the command. See Table 7 or examples.
Note: You can use the entire OID rather than the object name. Use the form:
OID
.
index
i
object-value
, as
shown in Figure 57 .
Message 2 snmpset Index Value Error
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FORCE10-COPY-CONFIG-MIB::copySrcFileType.101
Table 48-3. MIB Objects for Copying Configuration Files via SNMP
MIB Object OID Object Values Description