Dell Force10 E300, Configuration Manual

Page: 882 / 1262

882 | Routing Information Protocol
www.dell.com | support.dell.com
To add routes from other routing instances or protocols, use any of the following commands in the
ROUTER RIP mode:
To view the current RIP configuration, use the
show running-config
command in the EXEC mode or the
show config
command in the ROUTER RIP mode.
Set send and receive version
To specify the RIP version, use the
version
command in the ROUTER RIP mode. To set an interface to
receive only one or the other version, use the
ip rip send version
or the
ip rip receive version
commands
in the INTERFACE mode.
To change the RIP version globally in FTOS, use the following command in the ROUTER RIP mode:
You can set one RIP version globally on the
system
. This command sets the RIP version for RIP traffic on
the interfaces participating in RIP unless the interface was specifically configured for a specific RIP
version.
Use the
show config
command in the ROUTER RIP mode to see whether the
version
command is
configured. You can also use the
show ip protocols
command in the EXEC mode to view the routing
protocols configuration.
Command Syntax Command Mode Purpose
redistribute
{
connected
|
static
} [
metric
metric-value
] [
route-map
map-name
]
ROUTER RIP Include directly connected or
user-configured (static) routes in RIP.
•
metric
range: 0 to 16
•
map-name
: name of a configured route
map.
redistribute isis
[
level-1
|
level-1-2
|
level-2
]
[
metric
metric-value
] [
route-map
map-name
]
ROUTER RIP Include IS-IS routes in RIP.
•
metric
range: 0 to 16
•
map-name
: name of a configured route
map.
Note: IS-IS is not supported on the
S-Series platform.
redistribute ospf
process-id
[
match external
{
1 |
2
} |
match internal
] [
metric
value
] [
route-map
map-name
]
ROUTER RIP Include specific OSPF routes in RIP.
Configure the following parameters:
•
process-id
range: 1 to 65535
•
metric
range: 0 to 16
•
map-name
: name of a configured route
map.
Command Syntax Command Mode Purpose
version
{
1
|
2
} ROUTER RIP Set the RIP version sent and received on the system.