manualshive.com logo in svg

Dell Force10 E300, Configuration Manual, Page: 106 / 1262

Share
Download
Dell Force10 E300 Configuration Manual Download Page 106

106

|

802.3ah

www.dell.com | support.dell.com

Manage Link Layer OAM

Enable MIB Retrieval Support/Function

IEEE 802.3ah defines the Link OAM MIB in Sec 30A.20, “OAM entity managed object class”; all of the 
objects described there are supported. Note that 802.3ah does not include the ability to set/write remote 
MIB variables.

You must enable MIB retrieval support and the MIB retrieval function.

Adjust the Size of the Link OAM Event Log

Task

Command Syntax

Command Mode

Enable MIB retrieval support and/or 
the MIB retrieval function.

ethernet oam mib-retrieval

 {

supported

 | 

on

}

Default: Disabled

INTERFACE

Task

Command Syntax

Command Mode

Configure the size of the OAM event 
log.

ethernet oam event-log size

 

entries

Range: 0 to 200. Default: 50.

CONFIGURATION

Summary of Contents for Force10 E300















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments