Dell Force10 E300, Configuration Manual, Page: 923 / 1262

Security | 923
To assign commands and passwords to a custom privilege level, you must be in privilege level 15 and use
these commands in the following sequence in the CONFIGURATION mode:
To view the configuration, use the
show running-config
command in the EXEC Privilege mode.
Figure 45-2 is an example of a configuration to allow a user “john” to view only the EXEC mode
commands and all
snmp-serve
r commands. Since the
snmp-server
commands are “enable” level
commands and, by default, found in the CONFIGURATION mode, you must also assign the launch
command for the CONFIGURATION mode,
configure
, to the same privilege level as the
snmp-server
commands.
Step Command Syntax Command Mode Purpose
1
username
name
[
access-class
access-list-name
] [
privilege
level
]
[
nopassword | password
[
encryption-type
]
password
]
CONFIGURATION Assign a user name and password. Configure the
optional and required parameters:
•
name:
Enter a text string (up to 63
characters).
•
access-class
access-list-name:
Enter the
name of a configured IP ACL.
•
privilege
level
range: 0 to 15.
•
nopassword:
Do not require the user to
enter a password.
•
encryption-type:
Enter 0 for plain text or 7 for
encrypted text.
•
password:
Enter a string.
2
enable password
[
level
level
]
[
encryption-mode
]
password
CONFIGURATION Configure a password for privilege level.
Configure the optional and required parameters:
•
level
level:
Specify a level 0 to 15. Level 15
includes all levels.
•
encryption-type:
Enter 0 for plain text or 7 for
encrypted text.
•
password:
Enter a string up to 25 characters
long.
To change only the password for the enable
command, configure only the
password
parameter.
3
privilege
mode
{
level
level command
|
reset
command
}
CONFIGURATION Configure level and commands for a mode or
reset a command’s level. Configure the
following required and optional parameters:
•
mode:
Enter a keyword for the modes (exec,
configure, interface, line, route-map, router)
•
level
level
range: 0 to 15. Levels 0, 1 and 15
are pre-configured. Levels 2 to 14 are
available for custom configuration.
•
command:
A FTOS CLI keyword (up to 5
keywords allowed).
•
reset:
Return the command to its default
privilege mode.