Dell Force10 E300, Configuration Manual

Page: 905 / 1262

Rapid Spanning Tree Protocol | 905
Table 44-2 displays the default values for RSTP.
To change these parameters, use the following commands, on the root bridge:
View the current values for global parameters using the
show spanning-tree rstp
command from EXEC
privilege mode. See Figure 44-5 .
Table 44-2. RSTP Default Values
RSTP
Parameter
Default Value
Forward Delay 15 seconds
Hello Time 2 seconds
Max Age 20 seconds
Port Cost 100-Mb/s Ethernet interfaces 200000
1-Gigabit Ethernet interfaces 20000
10-Gigabit Ethernet interfaces 2000
Port Channel with 100 Mb/s Ethernet interfaces 180000
Port Channel with 1-Gigabit Ethernet interfaces 18000
Port Channel with 10-Gigabit Ethernet interfaces 1800
Port Priority 128
Task Command Syntax Command Mode
Change the forward-delay parameter.
• Range: 4 to 30
• Default: 15 seconds
forward-delay
seconds
PROTOCOL
SPANNING TREE
RSTP
Change the hello-time parameter.
Note: With large configurations (especially those with more
ports) Dell Force10 recommends that you increase the
hello-time.
Range: 1 to 10
Default: 2 seconds
hello-time
seconds
PROTOCOL
SPANNING TREE
RSTP
Change the max-age parameter.
Range: 6 to 40
Default: 20 seconds
max-age
seconds
PROTOCOL
SPANNING TREE
RSTP