Dell Force10 E300, Configuration Manual

Page: 50 / 1262

50 | Getting Started
www.dell.com | support.dell.com
Configure the Enable Password
The EXEC Privilege mode is accessed by the
enable
command. Configure a password as a basic security
measure. When using a console connection, EXEC Privilege mode is unrestricted by default; it cannot be
reached by a VTY connection if no password is configured. There are two types of
enable
passwords:
•
enable password
stores the password in the running/startup configuration using a DES encryption
method.
•
enable secret
is stored in the running/startup configuration in using a stronger, MD5 encryption
method.
Dell Force10 recommends using the
enable secret
password.
To configure an enable password:
Configuration File Management
Files can be stored on and accessed from various storage media. Rename, delete, and copy files on the
system from the EXEC Privilege mode.
The E-Series EtherScale platform architecture uses MMC cards for both the internal and external Flash
memory. MMC cards support a maximum of 100 files. The E-Series TeraScale and ExaScale platforms
architecture use Compact Flash for the internal and external Flash memory. It has a space limitation but
does not limit the number of files it can contain.
Task Command Syntax Command Mode
Create a password to
access EXEC Privilege
mode.
enable
[
password | secret
]
[
level
level
] [
encryption-type
]
password
level
is the privilege level, is 15 by default, and is not required.
encryption-type
specifies how you are inputting the password, is 0 by
default, and is not required.
• 0 is for inputting the password in clear text.
• 7 is for inputting a password that is already encrypted using a
DES hash. Obtain the encrypted password from the configuration
file of another Dell Force10 system.
• 5 is for inputting a password that is already encrypted using an
MD5 hash. Obtain the encrypted password from the configuration
file of another Dell Force10 system.
CONFIGURATION
Note: Using flash memory cards in the system that have not been approved by Dell Force10 can cause
unexpected system behavior, including a reboot.