Dell Force10 E300, Configuration Manual

Page: 59 / 1262

System Management | 59
The configuration in Figure 4-1 creates privilege level 3. This level:
• removes the
resequence
command from EXEC mode by requiring a minimum of privilege level 4,
• moves the command
capture bgp-pdu max-buffer-size
from EXEC Privilege to EXEC mode by,
requiring a minimum privilege level 3, which is the configured level for VTY 0,
• allows access to CONFIGURATION mode with the
banner
command, and
• allows access to INTERFACE and LINE modes are allowed with no commands.
Allow access to INTERFACE, LINE, ROUTE-MAP,
and/or ROUTER mode. Specify
all keywords in the
command.
privilege configure level
level
{
interface
|
line
|
route-map
|
router
} { command-keyword ||...||
command-keyword }
CONFIGURATION
Allow access to a CONFIGURATION, INTERFACE,
LINE, ROUTE-MAP, and/or ROUTER mode command.
privilege
{
configure
|
interface
|
line
|
route-map
|
router
}
level
level
{ command ||...|| command }
CONFIGURATION
Task Command Syntax Command Mode