Dell Force10 E300, Configuration Manual

Page: 1220 / 1262

1220 | E-Series TeraScale Debugging and Diagnostics
www.dell.com | support.dell.com
Line card core dumps are disabled by default. To enable line card core dumps and specify the shutdown
mode:
Once the core dump file has been created with the
logging coredump
command, the file can be deleted
from the Standby RPM flash although the space is not released. The CP kernel core dump file space cannot
be recovered by deleting the files. You must format the flash drive to recover the space.
To locate the line card core dump file:
Figure 61-12. Display the core dump directory.
Step Task Command Syntax Command Mode
1 Enable line card core dumps and
specify the shutdown mode.
logging coredump linecard
{
all
| {
0-13
}}
[
port-shutdown
|
no-port-shutdown
]
EXEC Privilege
Note: In the absence of port-shutdown and no-port-shutdown, the option no-port-shutdown is applied.
Message 22 Internal File Transfer of Core Dump to the RPM Complete
%E48TF:0 %TME-2-TASK SUSPENDED: SAVING FAILURE RECORD COMPLETED
Step Task Syntax Command Mode
1 Change the directory to CORE_DUMP_DIR.
cd CORE_ DUMP_DIR
EXEC Privilege
2
View the files in the directory.
dir
EXEC Privilege
FTOS#dir
Directory of flash:/CORE_DUMP_DIR
1 drwx 8192 May 12 2025 03:39:54 +00:00
2 drwx 32768 Jan 01 1980 00:00:00 +00:00
3 -r-x 134217728 Jul 21 2008 22:45:12 +00:00 f10cp.kcore.gz
5 -rwx 16384 Dec 03 2008 16:47:52 +00:00 f10cp.kcore.mini.txt
6 -rwx 154555270 Nov 20 2008 18:57:38 +00:00 f10lp13.core.gz
Line card core dumps use a file naming convention of f10lp{slot#}.core.gz.