Dell Force10 E300, Configuration Manual

Page: 400 / 1262

400 | High Availability
www.dell.com | support.dell.com
You can select which process may attempt to restart, and the number of consecutive restart attempts before
failover, but by default, every process causes a system reload or RPM failover.
When a process restarts, FTOS displays Message 9 .
You can specify the timestamp in hours so that if the number of restart attempts exceeds the configured
limit within this time frame, no further process restarts are attempted. The next time a software exception
occurs within this process, the system reloads for a single-RPM system and fails over to the standby RPM
for a dual-RPM system.
When a system exceeds the configured restart threshold, FTOS displays Message 10 .
Task Command Syntax Command Mode
Enable Process Restartability for a
process or task.
process restartable
[
process
] [
count
number
] [
period
hours
]
CONFIGURATION
FTOS(conf)#process restartable radius ?
count Specify max number of auto-restarts (default=3)
<cr>
FTOS(conf)#process restartable radius count ?
<1-3> number of times value to auto-restarts
FTOS(conf)#process restartable radius count 3 ?
period Specify time span for auto-restart count (default=1)
<cr>
Display the processes and tasks
configured for restartability.
show process restartable
[
history
] EXEC Privilege
FTOS#sho processes restartable
--------------------------------------------------------------------------------------------------
Process name State How many times restarted Timestamp last restarted
--------------------------------------------------------------------------------------------------
radius enabled 0 [-]
tacplus enabled 0 [-]
--------------------------------------------------------------------------------------------------
FTOS#show processes restartable history
--------------------------------------------------------------------------------------------------
Process name Timestamp last crashed
--------------------------------------------------------------------------------------------------
radius [5/23/2001 10:11:47]
--------------------------------------------------------------------------------------------------
Message 9 System Message for Process Restarts
May 8 06:28:35: %RPM0-P:CP %TME-2-PROC_RESTART: Restarting crashed process tacplus
Message 10 System Message for Excessive Process Restarts
[for Dual RPM:] May 8 06:35:33: %RPM0-P:CP %TME-2-No More Restarts and do failover: process
tacplus reaches max restart with threshold 3
[for Single RPM:] Mar 1 10:21:47: %RPM0-P:CP %TME-2-No More Restarts: process tacplus reaches
max restart with threshold 3