Dell Force10 E300, Configuration Manual, Page: 503 / 1262

IPv6 Addressing | 503
Figure 22-7 illustrates the
show ipv6 route
command output.
Figure 22-7. Command Example: show
ipv6 route
Figure 22-8 illustrates the
show ipv6 route
summary command output.
Figure 22-8. Command Example:
show ipv6 route summary
Figure 22-9 illustrates the
show ipv6 route static
command output.
Figure 22-9. Command Example:
show ipv6 route static
FTOS# show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 2001::/64 [0/0]
Direct, Gi 1/1, 00:28:49
FTOS# show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
FTOS# show ipv6 route static
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
S 8888:9999:5555:6666:1111:2222::/96 [1/0]
via 2222:2222:3333:3333::1, Gi 9/1, 00:03:16
S 9999:9999:9999:9999::/64 [1/0]
via 8888:9999:5555:6666:1111:2222:3333:4444, 00:03:16