Dell Force10 E300, Configuration Manual, Page: 949 / 1262

Security | 949
Figure 45-16. Example Access-Class Configuration Using Local Database
VTY Line Remote Authentication and Authorization
FTOS retrieves the access class from the VTY line.
The Dell Force10 OS takes the access class from the VTY line and applies it to ALL users. FTOS does not
need to know the identity of the incoming user and can immediately apply the access class. If the
authentication method is radius, , or line, and you have configured an access class for the VTY
line, FTOS immediately applies it. If the access-class is
deny all or deny for the incoming subnet , FTOS
closes the connection without displaying the login prompt. Figure shows how to deny incoming
connections from subnet 10.0.0.0 without displaying a login prompt. The example uses as the
authentication mechanism.
Figure 45-17. Example Access Class Configuration Using Without Prompt
VTY MAC-SA Filter Support
FTOS supports MAC access lists which permit or deny users based on their source MAC address. With
this approach, you can implement a security policy based on the source MAC address.
To apply a MAC ACL on a VTY line, use the same
access-class
command as IP ACLs ( Figure 45-18 ).
Figure 45-18 shows how to deny incoming connections from subnet 10.0.0.0 without displaying a login
prompt..
Note: See also the section Chapter 8, IP Access Control Lists (ACL), Prefix Lists, and Route-maps .
FTOS(conf)#user gooduser password abc privilege 10 access-class permitall
FTOS(conf)#user baduser password abc privilege 10 access-class denyall
FTOS(conf)#
FTOS(conf)#aaa authentication login localmethod local
FTOS(conf)#
FTOS(conf)#line vty 0 9
FTOS(config-line-vty)#login authentication localmethod
FTOS(config-line-vty)#end
FTOS(conf)#ip access-list standard deny10
FTOS(conf-ext-nacl)#permit 10.0.0.0/8
FTOS(conf-ext-nacl)#deny any
FTOS(conf)#
FTOS(conf)#aaa authentication login tacacsmethod
FTOS(conf)#tacacs-server host 256.1.1.2 key force10
FTOS(conf)#
FTOS(conf)#line vty 0 9
FTOS(config-line-vty)#login authentication tacacsmethod
FTOS(config-line-vty)#
FTOS(config-line-vty)#access-class deny10
FTOS(config-line-vty)#end
(same applies for radius and line authentication)