Dell Force10 E300 Configuration Manual Download Page 531

Page: 531 / 1262

Intermediate System to Intermediate System |

531

FTOS displays debug messages on the console. Use the

show debugging

command in EXEC Privilege

mode to view which debugging commands are enabled.

Enter the keyword no followed by the debug command to disable a specific debug command. For example,
to disable debugging of IS-IS updates, enter

no debug isis updates-packets

Enter

no debug isis

to disable all IS-IS debugging.

Enter

undebug all

to disable all debugging, e.

IS-IS Metric Styles

The following sections provide additional information on IS-IS Metric Styles.

•

IS-IS Metric Styles on page 531

•

Configure Metric Values on page 532

FTOS supports the following IS-IS metric styles:

•

narrow (supports only type, length, and value (TLV) up to 63)

•

wide (supports TLV up to 16777215)

•

transition (supports both narrow and wide and uses a TLV up to 63)

•

narrow transition (accepts both narrow and wide and sends only narrow or old-style TLV)

•

wide transition (accepts both narrow and wide and sends only wide or new-style TLV)

debug isis snp-packets

[

interface

]

EXEC Privilege

View IS-IS SNP packets, include CSNPs and
PSNPs.
To view specific information, enter one of the
following optional parameters:

•

interface:

Enter the type of interface and slot/port

information to view IS-IS information on that
interface only.

debug isis spf-triggers

EXEC Privilege

View the events that triggered IS-IS shortest path
first (SPF) events for debugging purposes.

debug isis update-packets

[

interface

]

EXEC Privilege

View sent and received LSPs.
To view specific information, enter one of the
following optional parameters:

•

interface:

Enter the type of interface and slot/port

information to view IS-IS information on that
interface only.

Command Syntax

Command Mode

Purpose

Summary of Contents for Force10 E300















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 E300

Reviews:

Related manuals for Force10 E300

Brands by name

Popular brands

Dell Force10 E300, Configuration Manual

Search results

Summary of Contents for Force10 E300

Reviews:

Related manuals for Force10 E300

Brands by name

Popular brands