Dell Force10 E300, Configuration Manual

Page: 1081 / 1262

System Time and Date | 1081
Set Daylight Saving Time Once
Set a date (and time zone) on which to convert the switch to daylight savings time on a one-time basis.
Command Syntax Command Mode Purpose
clock summer-time
time-zone
date
start-month start-day
start-year start-time end-month
end-day end-year end-time
[
offset
]
CONFIGURATION Set the clock to the appropriate time zone and daylight
savings time.
time-zone:
Enter the three-letter name for the time zone.
This name is displayed in the show clock output.
start-month:
Enter the name of one of the 12 months in
English.
You can enter the name of a day to change the order of the
display to
time day month year
start-day:
Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the
display to
time day month year
.
start-year:
Enter a four-digit number as the year.
Range: 1993 to 2035
start-time:
Enter the time in hours:minutes. For the hour
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
end-month:
Enter the name of one of the 12 months in
English.
You can enter the name of a day to change the order of the
display to
time day month year
.
end-day:
Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the
display to
time day month year
.
end-year:
Enter a four-digit number as the year.
Range: 1993 to 2035.
end-time:
Enter the time in hours:minutes. For the hour
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
offset:
(OPTIONAL) Enter the number of minutes to add
during the summer-time period.
Range: 1 to1440.
Default: 60 minutes