Club Car 2005 precendent, Maintenance And Service

Page: 76 / 256

STEERING AND FRONT SUSPENSION Front Suspension Components
Page 7-14 2005 Precedent Gasoline Golf Car Maintenance and Service Manual
7
Kingpin and Steering Spindle Installation, Continued:
5. Attach the tie rod ends (12) to the spindle tabs, then install and tighten the nuts (14) to 70 ft-lb (95 N·m).
Install the retaining pins (15) (Figure 7-18, Page 7-15) .
6. Install front hub and wheel. See Hub Installation on page 7-18.
CONTROL ARM REMOVAL
1. Loosen lug nuts on both front wheels and raise front of the vehicle with a chain hoist or floor jack. Place
jack stands under the front aluminum rails of the vehicle frame and lower the vehicle onto the jack stands.
2. Remove wheel.
3. Remove bolts (17) and move rack and pinion to allow clearance for bolt (19) (Figure 7-18, Page 7-15) .
4. Remove bolts (11 and 19).
5. Remove the control arm (6).
6. Inspect the bushings (7) and sleeves (8 and 9) in the control arm and replace them if necessary.