Club Car 2005 precendent, Maintenance And Service

Page: 226 / 256

UNITIZED TRANSAXLE Forward/Reverse Shifter Cable
Page 16-24 2005 Precedent Gasoline Golf Car Maintenance and Service Manual
16
FORWARD/REVERSE SHIFTER CABLE ADJUSTMENT
With the shifter lever of the unitized transaxle in the NEUTRAL position (Figure 16-55, Page 16-23) , the For-
ward/Reverse handle (20) should be straight up. For minor adjustments, the lock nut (26) may be loosened
and the ball joint socket (27) rotated to get the proper adjustment
. See following CAUTION.
ý
CAUTION
• Be sure threads of cable are engaged in ball joint socket at least 1/4 inch (6.35 mm). If ball
joint socket comes loose from the cable, the Forward/Reverse shifter will not operate
properly.
For major adjustments, the cable retaining nuts (28) must be loosened and adjusted. When the cable is prop-
erly adjusted, with the Forward/Reverse handle (20)
(Figure 16-56, Page 16-24) in the NEUTRAL position,
the shift lever of the transaxle will also be in the NEUTRAL position (Figure 16-56, Page 16-24) . Retighten
nuts at the Forward/Reverse assembly to 43 in-lb (4.9 N·m).
Figure 16-56 Forward/Reverse Positions
TOP VIEW
SHIFTER
LEVER
SHIFTER
ARM
R
F
N