Club Car 2005 precendent, Maintenance And Service

Page: 214 / 256

UNITIZED TRANSAXLE Unitized Transaxle Removal
Page 16-12 2005 Precedent Gasoline Golf Car Maintenance and Service Manual
16
Unitized Transaxle Removal, Continued:
12. Pull the floor jack from beneath the vehicle and move it away.
13. Carefully lift the snubber out of the snubber bracket in the vehicle frame and lower it to the floor
(Figure 16-26, Page 16-13) . The powertrain should be completely disconnected from the vehicle and
resting on the floor.
14. Grasp the ends of the leaf springs at the rear of the vehicle and roll the powertrain out from under the
vehicle (Figure 16-27, Page 16-13) .
15. Place blocks under the engine pan so they will completely support the engine and keep it level to the floor
(Figure 16-28, Page 16-13) . See following NOTE.
NOTE: Place the blocks so they will support the engine when the transaxle is detached and moved away
from the engine.
16. Remove the drive belt.
16.1. Grasp belt midway between drive and driven clutch and pull up on belt to force the driven clutch
sheaves apart. Roll the belt counterclockwise while pulling it off driven clutch (Figure 16-29,
Page 16-13) .
Figure 16-24 Raise Vehicle Figure 16-25 Position Jack Stands
Clu
bCa
r
Clu
bCa
r
Clu
bCa
r
Clu
bCar
JACK STAND
JACK STAND