Club Car 2005 precendent, Maintenance And Service

Page: 244 / 256

TORQUE CONVERTER Driven Clutch
Page 17-18 2005 Precedent Gasoline Golf Car Maintenance and Service Manual
17
DRIVEN CLUTCH INSTALLATION
1. To install the driven clutch, reverse the removal procedure. Make sure that the washer (12) is mounted
with the flat portion of the washer against the driven clutch (Figure 17-22, Page 17-15) . Secure with a
new bolt (11). See following NOTE.
NOTE: The bolt (11) must be replaced with a new bolt (CCI P/N 102242101) containing a locking patch
that will prevent the bolt from loosening.
2. Tighten the bolt (11) to 18 ft-lb (24.4 N·m).
3. Install access panel.
4. Connect the spark plug.
5. Connect battery cables, positive (+) cable first, and tighten hardware to 12 ft-lb (16.3 N·m).
See Figure 1-1, Section 1, Page 1-3. Coat terminals with Battery Terminal Protector Spray (CCI P/N
1014305) to minimize corrosion.