Callout
Component Name
1
Hood
Caution:
Refer to
Fastener Caution
in the Preface section.
Procedure
Loosen the hood hinge reinforcement nuts (Qty: 4).
1.
Adjust the hood in order to obtain an even gap on both sides between the hood and the fenders, the headlamps and
the front bumper fascia and so that the hood is flush with both fenders on the front edge, the front bumper fascia
and the headlamps.
2.
Adjustment
• Hood to front fender (a) 3.0 mm ± 0.75 mm (0.12 in ± 0.03 in)
• Hood to headlamp (b) 3.0 mm ± 1.0 mm (0.12 in ± 0.04 in)
• Hood to headlamp (c) 4.5 mm ± 1.5 mm (0.18 in ± 0.06 in)
• Hood to front bumper fascia (d) 4.0 mm ± 1.0 mm (0.16 in ± 0.04 in)
Tighten
26 N·m (20 lb ft)
Bolted Exterior Body Panels and Closures
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
