Create a 5 x 18 mm (4/16 x 11/16 in) slot for MIG-Brazing where front wheelhouse front panel and front wheelhouse panel rear
reinforcement overlap.
2.
Clean and prepare the attaching surfaces for brazing.
3.
Position the front wheelhouse panel rear reinforcement on the vehicle.
4.
Verify the fit of the front wheelhouse panel rear reinforcement.
5.
Clamp the front wheelhouse panel rear reinforcement into position.
6.
Braze accordingly.
7.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
