Warning:
Use the proper eye protection when drilling to prevent metal chips from causing physical injury.
Clamp the strut in a vise horizontally with the rod (1) completely extended.
1.
Drill a hole in the strut at the center of the end cap (3) using a 5 mm (3/16 in) drill bit. Gas or a gas/oil mixture will exhaust when
the drill bit penetrates the strut. Use shop towels in order to contain the escaping oil.
2.
Remove the strut from the vise.
3.
Hold the strut over a drain pan vertically with the hole down.
4.
Move the rod (1) in and out of the tube (2) to completely drain the oil from the strut.
5.
Front Suspension
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
