Remove the remaining parts of the front bumper impact bar.
8.
Installation Procedure
Position the front bumper impact bar on the vehicle.
1.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the 8 front bumper impact bar bolts (1) and tighten to
110 N·m (81 lb ft)
.
2.
Note:
Use only the original front bumper impact bar bolts. Replace bolts if damaged.
Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
.
3.
Install all related panels and components.
4.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
5.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
6.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
