Callout
Component Name
Preliminary Procedure
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
1
Steering Linkage Tie Rod Nut
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten
35 N·m (26 lb ft)
2
Steering Linkage Inner Tie Rod Nut
Tighten
60 N·m (44 lb ft)
3
Steering Linkage Outer Tie Rod
Procedure
Use
CH-161-B
puller to separate the steering linkage outer tie rod from the steering knuckle.
1.
Inspect the steering linkage inner tie rod for bent or damaged threads.
2.
Clean the tapered surface of the steering knuckle.
3.
Center the steering angle sensor. Refer to
Steering Angle Sensor Centering
.
4.
Check and adjust wheel alignment. Refer to
Wheel Alignment Measurement
.
5.
Special Tools
CH-161-B
Puller
For equivalent regional tools, refer to
Special Tools
.
Power Steering
STEERING
S e c tion 09
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
