Removal Procedure
Warning:
Refer to
Hot Exhaust System Warning
in the Preface section.
Warning:
Refer to
Protective Goggles and Glove Warning
in the Preface section.
Open the hood.
1.
Raise the vehicle by its full height. Refer to
Lifting and Jacking the Vehicle
.
2.
Remove the heated oxygen sensor (1).
3.
Remove the 4 exhaust flexible pipe bracket bolts (5).
4.
Remove the 3 exhaust flexible pipe nuts (8).
5.
Remove the 2 exhaust flexible pipe nuts (3).
6.
Remove the exhaust flexible pipe (7).
7.
Remove the gasket (9).
8.
Remove the gasket (4).
9.
Installation Procedure
Install a NEW gasket (4).
1.
Install a NEW gasket (9).
2.
Install the exhaust flexible pipe (7).
3.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install 2 NEW exhaust flexible pipe nuts (3) and tighten to
20 N·m(15 lb ft)
.
4.
Install 3 NEW exhaust flexible pipe nuts (8) and tighten to
20 N·m(15 lb ft)
.
5.
Install the 4 exhaust flexible pipe bracket bolts (5) and tighten to
40 N·m(30 lb ft)
.
6.
Install the heated oxygen sensor (1) and tighten to
40 N·m(30 lb ft)
.
7.
Lower the vehicle by its full height.
8.
Close the hood.
9.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
BACK TO MAIN INDEX
ADDITIONAL LINKS
S e c tion 00
