Note:
Double the number of drills at the flange where front wheelhouse panel and front compartment side rail overlap (1).
Drill 8 mm (5/16 in) for plug welding along the edges of the front wheelhouse as noted from the original panel.
3.
Clean and prepare the attaching surfaces for welding.
4.
Position the front wheelhouse on the vehicle.
5.
Verify the fit of the front wheelhouse.
6.
Clamp the front wheelhouse into position.
7.
Plug weld accordingly.
8.
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
9.
Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
.
10.
Install all related panels and components.
11.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
12.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
13.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX