Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
1.
Support the rear axle with a tall jack stand near the shock absorber.
2.
Remove the lower shock bolt. Refer to
Shock Absorber Replacement
.
3.
Using the tall jack stands, slowly lower the rear axle in order to remove tension from the rear springs.
4.
Remove the spring (1).
5.
Remove the upper spring seat/jounce bumper (1) from the spring, while leaving the lower spring seat on the axle.
6.
Installation Procedure
Install the upper spring seat/jounce bumper (1) on the spring.
1.
Rear Suspension
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
