The tire must be in the relaxed position when the repair unit is installed. Do not spread the beads excessively.
Two-Piece Plug and Repair Units
If applicable, install the repair unit so that the alignment is correct.
1.
Center the repair unit over the injury and stitch down thoroughly with the stitching tool, working from the center out.
2.
Being careful not to stretch the plug material, cut the plug flush with the outer tread.
3.
Combination Repair/Plug Units
Pull the plug through the injury until the repair just reaches the liner. Stitch down thoroughly.
1.
Follow the repair material manufacturer's recommendations for further installation instructions.
2.
Consult your repair material supplier for the proper stitching tool.
Safety Cage
Some run flat tires may require more than 275 kPa (40 psi) to seat the bead. In such a case, a tire safety cage must be used. Consult the
tire manufacturer for its individual repair policy.
Final Inspection
Tyre and Wheels
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
