Braze accordingly.
5.
Grind down weld seams as needed for related panels and components.
6.
Clean and prepare the attaching surfaces for welding.
7.
Position the front end sheet metal cross panel reinforcement (1) on the vehicle.
8.
Verify the fit of the front end upper tie bar.
9.
Clamp the front end sheet metal cross panel reinforcement into position.
10.
Spot weld accordingly.
11.
Use factory slots for slot brazing.
12.
Install front bumper impact bar before applying the sealers and anti-corrosion materials.
13.
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
14.
Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
15.
Install all related panels and components.
16.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
17.
Enable the SIR system. Refer to
SIR Disabling and Enabling
18.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX